Hydraulic Jack                                 HM100

◆Compact and stable construction;

◆Can be used in any position;

◆Housing revolves 360 degrees. 

◆Lowering speed can be accurately adjusted;

◆Protected against overloading;

◆Pump lever is removable; 

◆According to CE and US standard USA ASME/ANSI B30.1.1986.  



     

CAUTIONS!

◆To avoid possible personal injury or damage to equipment. 

◆Do not exceed the maximum load capacity of the jack. 

◆Do not add additional load to a lifted load. 

◆Do not use in unstable or hazardous positions. 

◆Unit must be used on flat surfaces able to carry the load. 

◆The load must be stable during lifting. 

◆An unstable load may cause the jack or load to slip. 

◆Do not use jack(s) if damaged, altered or in poor condition. 

◆Do not lift people or loads with people on them. 

◆Do not lift at the end of the toe. Fully engage the load with the toe.